01 - Apply Clear Gel generously across the treatment area.

02 - Press the power button once to turn it on. ZIIP DOT starts in TARGET mode to target blemishes.

03 - Place the electrodes on the skin, making sure the electrode behind the ZIIP logo is in contact with each spot, and twist clockwise & anti-clockwise.

04 - After 60 seconds, the device automatically switches to CALM mode.

05 - Remove Clear Gel and wipe down your device.

Full-face treatment: Long hold the power button to turn on. TARGET mode lasts for 4 minutes and CALM mode lasts for 2 minutes. Conduct a sensitivity test before first use (see user manual for instructions).

Considerations

·Always use with Clear Gel — the device needs a conductive layer to work, and too little gel causes friction on the skin.

·Begin with clean, dry skin, free of other skincare.

·Keep both electrodes in contact with the skin throughout the treatment.

·Remove Clear Gel and wipe the device down after each use.

·Conduct a sensitivity test before first use (see user manual for instructions).